Automotive Body Paint

Clean and degrease the surface, repair dents and rust, sand to a feathered edge, apply corrosion-resistant primer where needed, and use tack cloths to remove dust; proper preparation ensures adhesion and a smooth finish

Aerosol cans are suitable for small repairs, touch-ups, and blending but are limited for large panels due to coverage, control, and finish consistency; spray guns with proper compressors are recommended for full-panel or whole-car jobs

Use a properly fitted respirator rated for organic vapors, chemical-resistant gloves, eye protection, and coveralls; work in a well-ventilated area or a spray booth with appropriate filtration to control fumes and overspray

Allow recommended cure time, then wash gently with automotive-safe soap, avoid abrasive polishes for several weeks, and use quality wax or paint sealant after full cure to protect against UV and contaminants

Common issues include runs/sags from applying too much paint, orange peel from improper atomization or distance, fisheyes from contamination, and poor adhesion from inadequate surface prep; follow manufacturer spray settings, thin as recommended, and maintain clean conditions