Masonry Drill Bit Sets

Choose bits sized for the holes you need, match the shank type to your drill (SDS, SDS-Plus, or round/hex for hammer drills), pick materials/coatings suited for masonry (carbide-tipped for concrete, masonry, and brick), and select a set that includes the length and diameter range for common tasks

Carbide-tipped bits are the standard for concrete and brick because the carbide maintains a sharp edge and resists heat; multi-facet carbide tips or brazed carbide tips improve durability and cutting action for hard aggregates

Use SDS or SDS-Plus bits if your rotary hammer accepts those shanks—they transfer hammering force more efficiently for heavy-duty concrete work; standard round- or hex-shank masonry bits are fine for hammer-capable cordless drills and light-to-moderate drilling in brick or block

A useful general-purpose set typically covers common diameters from about 1/16" to 1/2" (or metric equivalents) and includes several lengths (short for anchor holes, long for deeper drilling); sets with 10–25 pieces usually cover typical homeowner and contractor needs

Operate with the drill's hammer mode when appropriate, use the correct speed and light steady pressure without forcing, clear dust from the hole frequently, and replace bits that are chipped or blunt—sharpening carbide tips is limited, so replacement is often necessary

Wear eye protection, hearing protection, and a dust mask or respirator for silica-containing materials; clamp or support work when possible, be mindful of rebar and hidden utilities, and use water suppression or a vacuum to reduce dust when applicable

Masonry sets range from budget options under $25 for small homeowner sets to (price varies)+ for larger or professional-grade SDS sets; many mid-range sets fall between $30 and $80 depending on brand, piece count, and tip quality