1/2 lb Anodized aluminum jump rings 3/16" ID 18G
Half-pound bag of anodized aluminum jump rings, 3/16 inch inside diameter, ~1.2 mm wire, saw-cut for precise closings. Includes extras for defects; color may vary batch to batch
Highlights
- anodized aluminum with tough finish
- precise saw-cut rings for reliable closings
- large quantity with extras
Pros
- consistent color and finish
- high ring quality for closures
- includes extra rings to account for defects
- tough anodized layer
- approximate quantity per bag
Cons
- color shade varies by batch
- some rings may have un-anodized cut areas
- durability may vary with handling
Best For
Features
- You are looking at One Half Pound of quality Anodized Aluminum jump rings for making outstanding jewelery or mail armor. These rings are saw cut by an extremely precise jewelers saw (0. 008" thick) to make perfect closings for your projects.
- The dimensions of the rings are 3/16 inch(5MM) Inside Diameter and roughly 3/10 inch(7. 5MM) Outside Diameter. Aspect Ratio(AR) = 4. 0
- The wire is 16AWG/18SWG or 1. 2MM in Diameter
- There are approximately 4000 rings in each half pound bag(measured by weight)
- we always include extra in each bag just in case there are any defects from the manufacturing process. The color shade can vary from batch to batch so be sure to order everything you need at once if you are doing a large project.
- They are made of aluminum which is coiled first then anodized before being cut. The Anodized layer is very tough and won't scratch off as easily as coated or enameled rings. Each batch does include some defects due to how they are made. We always include extra to account for any defects you may receive! Every ring will have an un-anodized area where the cut is made
- so when you close them they should appear as a solid color. Doing the anodizing in this way ensure the brightest finish possible.
